Home » Appliances Repair
Category Archives: Appliances Repair
Shoe odors are caused by bacteria growing in moist, dark places. They can also be caused by sweat and oil from your skin that gets into the fibers in the shoes.
The great news is that baking soda is a great way to get rid of shoe odor – sometimes once and for all.
In this article, you will learn how to remove shoe odors from your home and shoes, along with other crucial tips to remember when it comes to getting rid of annoying odors in your home.
Image Credit: http://housewifehowtos.com
What the most common sources of shoe odors are
Shoes are often lined with materials that cause odors to build up during everyday use.
This buildup of sweat, bacteria, and oil is known as foot funk, shoe funk, or shoe odor.
Other sources of shoe odor include dirty shoes that have been worn without socks, smelly shoes that were never cleaned before being placed in storage, and smelly athletic gear that needs washing after heavy use.
How to remove shoe odors from your home and shoes
Baking soda will do the trick for most people when it comes time to clean out old stinky shoes or get rid of new stinky shoe smell.
There are several simple ways you can use baking soda to remove the funky smells from your shoes.
Simply sprinkle baking soda into the inside of your smelly shoes and lace them up as usual for a couple of days or until the stench is gone.
Another way to use baking soda to remove shoe odors is to make a thick paste with water and baking soda, apply it to any surfaces that have been affected by the odor, let it dry, then take a damp rag and wipe it away.
It’s also a good idea to place a small container of baking soda in your closet, gym bag, or other places where you store your shoes as this will help absorb any lingering foot funk.
When removing shoe odors from carpeting or hardwood floors, porous materials can be treated with a mixture of baking soda and water, or baking soda can be sprinkled on the carpet or floor and brushed with a broom.
Please note that this method will not work for concrete floors, most sealed wood floors, tile floors, linoleum tiles, vinyl tiles, varnished wood floors, granite countertops, etc., because baking soda cannot penetrate the surface to neutralize the odors from below. In other words, these surfaces would have to be stripped of their coating for the baking soda to get through to where it’s needed.
However, if you want to clean sticky grease off kitchen cabinets, then baking soda is the way to go.
How do I use baking soda for removing shoe odors? What do I need?
You’ll need a jar or container that’s big enough to hold the shoes you want to soak, baking soda, water, and an old towel. Then, follow these steps:
Step 1 – Fill your container halfway with lukewarm water Step 2 – Mix in 3 parts baking soda with 1 part water. For example, for every cup of water use 1/3 cup of baking soda or for every liter of water use 10 tablespoons (about 80 grams) of baking soda. Adding more baking soda will lead to better results but it could take longer to dry out.Step 3 – Soak your shoes in this mixture for at least 12 hours (for larger shoes like boots you may need even more time). Step 4 – After you’ve soaked your shoes for as long as needed, take them out and put them in a cool dry place to dry off. If you have a fan nearby set it to blow on low. This will speed up the process of drying your shoes and prevent any mildew from forming.Step 5 – Once your shoes are completely dry, sprinkle some baking soda inside them and leave overnight so that they can absorb any odors still left behind. You should do this before wearing your shoes again or putting them back into storage.
Why baking soda is the best way to get rid of shoe odor
Baking soda neutralizes odors naturally by absorbing unpleasant smells into itself where it then breaks down into inert components that are not likely to cause any further harm. This makes it much safer than other household cleaners which typically mask bad odors with artificial fragrances or kill bacteria with harsh chemicals like bleach or ammonia.
Using these types of cleaners often causes the stinky shoes you’re trying to get rid of to smell even worse and in some cases, the fumes can be harmful.
Baking soda is also a natural deodorizer so it will not only remove shoe odor but also any other odors that may be present in your home.
Tips for using baking soda in your closet, on carpeting, and hardwood floors
When cleaning your home with baking soda it’s important to keep these tips in mind.
Test an inconspicuous area before applying baking soda to a large surface
Applying baking soda to an inconspicuous area should be enough to test if it’s safe to move forward. In addition, this will also help you determine how long you should leave the baking soda on the surface before rinsing it off.
lways use a damp cloth when wiping away baking soda residue – dry surfaces can become scratched.
A damp cloth will help you remove any residue without scratching the surface. This is especially important when cleaning delicate surfaces like wood floors or furniture.
Never mix baking soda with other cleaners – this can create hazardous fumes.
When it comes to removing shoe odors using baking soda it’s always best to stick with just the baking soda and water. This is because other cleaners like bleach or ammonia can react with baking soda and create harmful fumes.
Keep in mind that baking soda may not be suitable for all surfaces
You should avoid using baking soda on marble, granite countertops, tile floors, varnished wood floors, painted walls, etc. If you do so, it can leave behind a dulling film or even etch the surface if left to sit too long before being washed away with water.
Do not pour water onto baking soda if it is being used in shoes – this will damage the footwear.
Baking soda should always be used dry in shoes. If it gets wet, for example from a spilled liquid, the material will start to break down and eventually turn into a sticky mess that can damage your shoe.
Baking soda can be harmful to pets
Put your pets away when using baking soda to clean as it can be harmful if ingested. Baking soda is not poisonous to pets but it can cause them to vomit or have diarrhea if they consume too much of it.
Removing Shoe Odors With Baking Soda – FAQ
Why should I use baking soda to remove shoe odors?
Baking soda can help you keep your stinky shoes smelling fresh. It’s the best way to deodorize and neutralize smells like those from your athletic shoes, footgear, and boots.
Image Credit: http://armandhammer.com
Is it safe to use baking soda in my shoes?
Baking soda is a safe way to soak up any odor-causing bacteria or fungus which may be living in your sneaks. It’s also an all-natural remedy that has no side effects. However, if you happen to have any open cuts on your feet please refrain from using this method because of the risk of infection.
What if my shoes are wet?
If your shoes are wet, removing as much water as possible before using the baking soda is ideal. You can do this by using a shoe dryer, airing them out in the sun, or stuffing them with newspapers. Once your shoes are mostly dry, you can then proceed with the baking soda remedy.
Can I use this method for all types of shoes?
This method should work for all types of shoes, but if you have leather or suede shoes be careful not to soak them for too long. Baking soda can be harsh on these materials and may cause discoloration or damage.
Odors from sneakers, footgear, and boots can be a real nuisance. But with a little baking soda, these smells can be neutralized and removed in no time. Soak your shoes in a baking soda and water solution, or sprinkle some baking soda inside your shoes to help absorb any unwanted smells.
Baking soda can also be used tomake DIY laundry detergent so you can keep your clothes smelling fresh too.
Final thoughts on removing shoe odors with baking soda
In conclusion, using baking soda is the best way to deodorize and neutralize smells such as those from your athletic shoes, footgear, and boots. This safe solution can help you ensure your stinky shoes start smelling fresh.
The post Removing Shoe Odors With Baking Soda appeared first on Kitchen Infinity.
Did you miss our previous article…
Birds are a great addition to any yard, but how do you get them to come? You can’t just put out a birdbath and expect birds to flock. They need more than that; they need food, water, and shelter. To attract the most birds into your garden, it’s important to make sure all of their needs are met.
All it takes is one little bird bath fountain in your backyard or front yard. The sound of running water will attract many songbirds, including blue jays, woodpeckers, and sparrows. If you’re looking for something more traditional, like a stone basin with plants around it, we have those too! There are dozens of designs available so you can find the perfect one for your home.
Types of Bird Bath Fountains
Hanging Bird Bath Fountains
A hanging bird bath fountain is a great way to add motion and sound to your outdoor space. The sound of falling water refreshes and captivates. It can even contribute to the overall ambience of your yard or garden.
Image credit: https://cdn.shopify.com/
These bathroom fountains for birds are made from durable steel and other metals, making them long-lasting, low-maintenance additions to your garden. You can also use it as a bird feeder if you prefer.
Pedestal Bathroom Fountain for Birds
Built with you in mind, pedestal bird bath fountains add a touch of class to your yard while giving birds the perfect place to get clean and take a drink. Like other bathroom fountains for birds, this type is made from durable materials such as resin and metal.
This classic pedestal-style bath is popular with bird lovers. It can withstand all types of weather to attract birds year-round. The shallow bowl is also ideal for smaller birds.
Water Wiggler Bathroom Fountain for Birds
As the name suggests, this bathroom fountain also wiggles to attract birds. It moves water through an internal tube system that gets birds’ attention with movement and sound. The cup is ideal for tiny songbirds such as finches, flycatchers, wrens, thrushes, and more.
Image credit: https://www.duncraft.com/
Birding experts also recommend the water wiggler to catch the attention of more bird species with moving water. You might also attract migrating birds like warblers that don’t visit bird feeders.
Ground Bird Bath Fountain
This fountain is a ground-mounted bathtub fountain with a very shallow dish. Its design allows water to change directions many times before it eventually falls into the shallow dish. The single tube emits a gentle bubbling noise that makes it readily available for birds in search of water.
It lessens the need for frequent cleaning because dirt and debris do not settle as quickly as they would on a static model. Ground dwelling birds like sparrows and juncos will appreciate the easy access to water. It holds four cups of water in the shallow basin.
Tree Stump Bird Bath Foundation
This fountain provides water for various types of birds in an instant. It is built around a tree stump foundation which offers the user several options in addition to holding water. You can place plants in the water or on top, you can feed the bird’s fruit that will attract them to your yard, and they can even rest inside it when weary.
Image credit: https://images.squarespace-cdn.com/
The three-leg design prevents it from being knocked over by other birds or neighborhood kids. If you adore cardinals, then this is the right choice. The natural look will blend well in your backyard.
It’s made of durable resin to last for years. You can also use it as an indoor decorative piece. The realistic-looking tree stump is topped off by a bird’s nest, with faux green succulents growing on the wood.
Glass Koi Bath Fountain
Koi fish baths are remarkable pieces that add an aquatic feel to your home. The inclusion of glass makes it look like you’re gazing into the waters of a river or pond. It has a calming vibe and can add to the serenity in any room. This glass bowl is bright and light, with a sturdy metal base included. The frame folds up easily to store it in your garden shade.
Sunflower Bird Bath Fountain
If you want a smaller fountain, this one is a great choice. It’s a hollowed-out sunflower complete with a birdbath and foliage around the base. The colors are bright and cheerful, and it gives an old-world feel to your garden or porch setting.
The pedestal birdbath can be used as a beautiful home accent, but it’s also functional. The water falls out of the bowl and into the pool below, which can be used to your pet’s or children’s delight. This is a great way to keep them cool in the summer months.
Mosaic Bird Bath Fountain
How beautiful and unique! This one is made from a mosaic of brightly colored tiles and has a little bird on top that sends water into the bowl below. You can set this in your front yard or backyard, and it will give off a strong sense of style and class. It’s perfect for pet owners who want to keep their animals cool during the warm months.
This handcrafted mosaic piece will also sparkle in direct sunlight and beautify the shade. It doesn’t come with a stand, so the seller recommends the dish on an inverted terra-cotta pot.
Stone Bird Bath Fountain
Here we have a very natural and rustic birdbath fountain. It’s made from mainly stone and is perfect for people who want to keep nature close by but still give their outdoor space a touch of class. It has an upper portion with a little opening that the water pours out of. You can either sit this on dry land or fill it up with water and let the birds drink from it.
This is another natural birdbath fountain that is gorgeous. It uses a large enough bowl to place plants inside of it if you wish to do so. This also has an inverted top portion, so it creates a nice gentle sound when the water starts to flow.
Ceramic Bird Bath Fountain
This is the perfect fountain for anyone who wants a little piece of art in their outdoor space. This has a small base and inverted top but with intricate designs that give it such an uplifting feeling when you look at it. Setup is quick and easy, you screw the bowl onto the pedestal stand.
Concrete Bird Bath Fountain
This is what I ended up getting for my backyard. It has a unique design, with the bowl perched atop the pedestal stand. However, there are no bells and whistles when it comes to this fountain. You can also create your unique design by painting it whatever color you like.
Cast Iron Bird Bath Fountain
This birdbath fountain has a classic look to it. But what makes this stand out from the rest is the little pump that pumps water up and runs down throughout the tiers of this fountain. It adds to its charm and loveliness. If you like an artistic touch to your backyard, then this is just for you.
Solar Bird Bath with Lights
If you want to go green and add some style, then this is the fountain for you. All you have to do is leave it out in the sun and watch your fountain light up your backyard. The solar power powers the pump, so there are no messy wires running all over the place. Just make sure that this birdbath faces south to receive direct sunlight to turn on at night.
Image credit: https://wildbirdsunlimited.typepad.com/
Solar Water Fountain with LED Lights
This is the most colorful of the three fountains. You have a simple fountain with some solar panels in front by day. But by night, watch lights light up within the solar panels and reflect off the water for an enchanting glow. Since the lights are solar-powered, you don’t have to worry about hauling extension cords around or even changing batteries.
The three different shine modes allow these lights to turn on at dusk and off at dawn. Just make sure that this fountain is facing south to get enough sunlight to charge during the day.
Plastic Bird Bath and Feeder Fountain
This is the cheapest and simplest of bird bath fountains. It has a little basin for birds to drink from, along with a feeding ring above it, so you can also feed them as they drink. The entire fountain is made out of plastic, so no need to worry about rust or metal pieces that might fall apart.
They included a plastic water tray that holds water, so remove it, and you have a bird feeder. The base is crafted of durable Eastern red cedar wood.
FAQs on Bird Bath Fountains and Why You Need Them
What is the importance of bird bath fountain?
Birds need bird baths in the winter, just as they need the rest of the year. In the very cold months, water can be very hard to find, and they do appreciate a bird bath with accessible water in it. If your backyard has a heated bird bath, then you can expect some activity all year, even in the winter. They give you an opportunity to interact with different bird species and identify baby birds as well.
How often should you change the water in the bird bath?
You should change the water every two to four days then clean up the bird bath. Remember, taking care of birds coming to your yard involves providing them with clean water in the fountains.
Final Thought on Bird Bath Fountains
Birds need a full and clean bird bath. So if you build it, they will come. Make sure you clean your bird bath with a garden hose every couple of days. If you see dead bugs floating in it or algae starting to form, that’s a clear indication that it’s time to clean. You can also learn different ways to attract birds to your compound such as putting our hummingbird feeders
The post Bird Bath Fountains and Why You Need One appeared first on Kitchen Infinity.
Did you miss our previous article…
Electrical service panels are an essential part of your home’s electrical wiring system. If you’ve ever wondered what is inside a service panel, how it works, and why it’s so important, then this article is for you. It explains the basics of your home’s electrical service panel so that you can better understand how to use it and stay safe. Read on!
What Is an Electrical Service Panel?
The electric service panel is the connection between internal wires coming from the street and the internal electrical wires of the home’s electrical system. The service panel is the central distribution point that connects the service wire to the exit wires.
Image credit: https://www.dfliq.net/
These exit wires are called branch circuits or branch wire circuits. In single-family residences, the owner of the building owns the electric service panel and not the electric company.
In that case, the owner is responsible for all the electric service panel issues. As a homeowner, you might not realize how much damage can be done if this service isn’t installed or maintained properly.
Where to Find Electrical Service Panel
The home electrical panel is generally kept away from the main household activities. These locations include the garage, hallway leading to the garage, basement, and closet. You can also find your electrical panel by locating the service drop and service head on your roof.
Usually, the service panel should be directly below, in one of the home’s stories. If the power lines are buried, the line will start on the street and connect to the home from the front or side of the house.
Older houses using fuse boxes are placed in the outer part of the house, especially to a section of the wall or in a particular structure constructed to house the distribution box. In most modern households, the electrical service panel can be found near the electrical meter, which measures the electricity consumed every month.
Types of Electrical Service Panel Basics
Main Electrical Service Panel
The main electrical service panel is the connection point for all the electric lines entering the house. This is also where copper cables connect to fuses or circuit breakers that protect wiring in your home’s walls and circuits. This allows current to flow safely through fixtures, appliances, outlets, and light switches.
Image credit: https://www.thespruce.com/
With the main electrical service panel, you can shut off the incoming utility power and receive incoming power from the utility company and distribute it to each branch circuit that supply various fixtures, outlets, appliances, and other devices throughout the house.
Electrical Service Panels are generally referred to as either main or sub-panels, depending on the circuit breaker size. The service panel that supplies electricity to your entire home is the main electrical service panel or main breaker box. Your home’s main electrical service panel should be installed by a trained professional because it must meet specific building codes and requirements. Professionals also know how to calculate electric load capacity for homes, hence ensuring safety.
A sub-panel is a power distribution center with circuit breakers and incoming electrical service. This type of panel feeds electricity into a smaller area, such as an outbuilding or detached garage. A sub-panel can only be fed by a single incoming circuit from the closest main electrical service panel.
In other words, it cannot be fed by the main electrical service panel you have in your home. A new sub-panel must be installed and wired to the closest main electrical service panel if additional circuits are needed.
Circuit Breaker Panels and Fuse Boxes
When a circuit draws more current than it’s designed to handle, the wiring gets hot and poses a fire hazard. Excessive current in a circuit is prevented by overcurrent safety devices, which disconnects incoming power to individual circuits when necessary.
In most contemporary systems, these are called circuit breakers. A circuit breaker is a switch that may shut off manually or trip automatically by an electric system overload. Fuse boxes are designed to prevent circuit overload. Circuit breakers and fuses are the weakest links in each electrical circuit, designed to fail safely.
It’s important to know what to be aware of when ensuring the proper function of these electrical safety devices in your home.
Service Distribution Panel and Branch Circuits
A service panel is a major component in an electricity supply system. It distributes power from the utility service drop to the individual branch circuits that serve your electrical appliances and light fixtures. All branch circuits originate at the main electrical service panel or the service distribution panel.
The panels are equipped with some mechanical device for disconnecting the home’s electrical circuits from the incoming power if the electric system fails. An overload can cause failure due to excessive heat or even catching fire. Although the main breaker is used to turn all branch circuits on and off at the same time, there are times only one branch circuit to a certain area of the home needs attention.
The most important function of the service panel is safety, keeping you and your family members safe from electrical shock. Any electrical repair in your home involves turning off the power to the circuit to be worked on, and this is only done at the service distribution panel. Depending on when your home was built, your service distribution panel may be either a circuit breaker panel or a fuse box.
What Can Go Wrong with Panels and Breakers
If a branch circuit breaker fails to trip when current flow exceeds safe levels, it could be the result of electrical corrosion. Corrosion occurs when electricity flows through a metal conductor such as copper or aluminum and slowly erodes that metal away.
Corrosion can lead to loss of material and weaken the connection between wires, damaging the breakers and creating a fire hazard. Electrical service panels should be inspected regularly for signs of corrosion.
Overloaded Circuits or Panels
If a circuit is overloaded with too many appliances, the wiring will get hot and may even melt the insulation on the wire. This can damage or destroy a breaker. Most household circuits are rated either 15-amps or 20-amps. A 15-amp circuit breaker can only handle around 12-amps, while a 20-amps circuit breaker can handle about 16 amps.
When you connect too many appliances to the same circuit, the overcurrent safety will frequently trip or blow.
Outdated Fuse Boxes
Older homes may have outdated fuse boxes instead of circuit breakers. They do the job, but they are less reliable and more difficult to inspect for hazardous conditions. You should upgrade any old fuse boxes to a modern service panel with circuit breakers as soon as possible. These older systems have the potential to become unsafe if not well maintained.
FAQs on Electrical Panel Basics Homeowners should Know
What is an electrical panel called?
A distribution board, also known as panelboard, breaker panel, or electric panel, is a component of an electricity supply system containing many electric circuits.
Final Thought on Electrical Basics You Should Know
All wiring in your home should be in accordance with local building and electrical codes. Most homeowners only have the experience of opening the outer door of the electrical service panel to flip on a disabled circuit breaker.
Even if you’re a DIY master, always hire a qualified electrician to do any work, especially when it comes to any work that involves removing the protective front cover. While the cost of electrical projects can be high, especially if you hire an electrician, it’s always worth it in the long run. It’s better to be safe than sorry.
The post Electrical Service Panel Basics Homeowners Should Know appeared first on Kitchen Infinity.
It’s not always easy to decide whether or not you should install a new shower unit in your home. There are many different types of showers available on the market, and there are several factors that come into play when determining which type is right for you.
In this article, we will take a look at the pros and cons of installing a prefabricated shower unit vs a tiled shower. We will also provide you with some tips on how to make the decision that’s right for you.
Let’s get right into it.
Image Credit: http://homeadvisor.com
Most important considerations
The most important thing to consider before installing any shower unit is what you will be using it for (for example, if it will primarily be used by individuals with mobility impairments, then your choice might be easier).
A prefabricated unit would likely be best for this use case because they’re typically easier to get in and out of than tiled units, but there are other considerations as well. These include cost, installation process, pros/cons of tiled showers vs prefabricated units, etc.
In addition to this, it’s important to consider if you have the skills necessary to install a prefabricated unit. If not, then installing a tiled shower will likely be your best option.
Prefabricated vs Tiled
Here are the basic things you need to know about these two types of showers.
Installed in sections and brought into the home already assembled (typically more expensive than other options)
Easy installation, generally considered to be more leak-proof than other types of showers
More expensive than other types of showers, may not be as aesthetically pleasing as some tiled showers
Built by gluing tiles directly onto the surface of an existing shower; typically installed with mortar on floor and ceiling (more labor-intensive but less costly than prefab units)
Aesthetically pleasing, can be customised to fit any space
More difficult and time-consuming to install than prefabricated showers, may be more prone to leaks
Other types of showers you might want to consider
A pre-made shower unit that uses standard fiberglass or acrylic tub/shower unit with a built-in shower receptor. These units typically have a vinyl liner and come in a variety of colors.
Inexpensive, easy installation
May not be as aesthetically pleasing as other types of showers, may not last as long as other types of showers
Sliding tub door
Installed like a typical tub/shower combo except that it uses sliding glass doors instead of curtains; typically installed in bathtub area (preferred by many for its ease of use)
Easy installation, no curtains to deal with, typically more watertight than other types of showers
May not be as aesthetically pleasing as some tiled showers, can be expensive if the glass is used
A closed unit that uses steam to create a sauna-like environment; typically installed in a separate room
A relaxing, invigorating environment, can help with respiratory problems and skin conditions
Installation can be expensive and complex, may not be suitable for all homes
There are many different types of showers to choose from, so it’s important to take into consideration what you will primarily be using the shower for.
If you’re looking for something easy to install and relatively leak-proof, then you’re likely best off with a prefabricated shower unit. If on the other hand, you want something aesthetically pleasing but still easy to use, then installing a tiled shower will likely be your best option.
When considering the cost of installing a shower unit, it’s important to remember that there is a wide range of options to choose from. A prefabricated unit will likely be more expensive than other types of showers, but it may be easier to install and less prone to leaks.
Conversely, a tiled shower will likely be less expensive than a prefabricated unit, but it will require more labour and may be more difficult to install.
The installation process for a shower unit can vary depending on the type of shower you choose. A prefabricated unit will likely require less labour than a tiled shower, but it may be more difficult to install if the existing plumbing is not compatible. Conversely, a tiled shower will require more labour, but it may be easier to install if you already have the necessary tools and materials.
If on the other hand, you choose to install aDIY walk-in shower, the process will be even more straightforward. Since these units are designed to be easy to install, you simply have to plan the space for the shower, cut the proper size holes in your floor and ceiling, and fit the pieces together.
The most difficult part of the installation process is usually cutting the holes in the floor and ceiling, so be sure to have a good saw on hand.
One of the biggest concerns with showers is whether or not they are leak-proof. This concern is especially important if you plan to install a tiled shower, as even a small leak can cause extensive damage over time.
There are a few things you can do to help ensure that your shower does not leak. First, be sure to use waterproof sealant around all of the joints to create a watertight seal. You should also consider using tile grout that is specifically designed for showers, as it will be more water-resistant than other types of grout. Finally, be sure to use a quality shower pan to help prevent water from seeping through the floor.
If you’re still concerned about leaks, you may want to consider installing a shower unit that comes with a warranty for water tightness. This will give you peace of mind that your shower will not leak, even if it is used frequently.
Leaks cause all kinds of headaches, no matter if you’re trying to fix a leaking shower,leaking ceiling, or even aleaky bathtub faucet. Be sure to take all the proper precautions to prevent any water damage in your bathroom.
Install A Prefabricated Unit Or A Tiled Shower – FAQ
What is the difference between a prefabricated unit and a tiled shower?
A prefabricated shower unit is a ready-made shower that is installed in your bathroom as a complete unit. A tiled shower, on the other hand, involves installing tiles over an existing bathtub or shower base.
Which is better – a prefabricated unit or a tiled shower?
There is no definitive answer to this question as it depends on your specific needs and preferences. Some people prefer the look of a tiled shower, while others find that prefabricated units are more convenient and easy to install. Ultimately, it comes down to personal preference.
How do I choose between a prefabricated unit and a tiled shower?
The best way to decide between these two options is to consider your budget, bathroom space, and installation skills. If you are on a tight budget, a prefabricated unit may be the better option. If you have a large bathroom and plenty of installation experience, then a tiled shower may be the better choice.
How do I install a prefabricated unit?
Most prefabricated units come with detailed installation instructions that you can easily follow. However, if you are unsure about how to install it, you can always hire a professional installer.
Image Credit: http://selectkitchenandbath.com
How do I install a tiled shower?
Installing a tiled shower is a more involved process than installing a prefabricated unit. You will need to remove the existing bathtub or shower base and install the tiles over the new shower base. If you are not confident in your tiling skills, you may also want to hire a professional tiler to do the job for you.
What are the advantages of a prefabricated unit?
A prefabricated unit can be a good choice if you want a contemporary look in your bathroom and don’t have much time for installation work. They are also cheaper than tiled showers, so they may be better value for money.
Final thoughts on installing a prefabricated unit or a tiled shower
In conclusion, there are several factors to consider when installing a prefabricated unit or a tiled shower. Cost, ease of installation, and durability are all important factors to consider when making this decision.
Prefabricated units are generally less expensive than tiled showers, but they may not be as durable. Tiled showers are more expensive to install, but they can last for many years if properly maintained.
In the end, the best option for your home will depend on your specific needs and budget. Be sure to weigh the pros and cons of each option before making a final decision.
The post Install A Prefabricated Unit Or A Tiled Shower appeared first on Kitchen Infinity.
Did you miss our previous article…
Window air conditioners are not designed to be in super cold climates, which means that if you live in a climate that gets below freezing, your window AC will freeze up. This can happen when the unit is running or not being used correctly – it’s just part of how they work.
In this article, we’ll explain how to prevent your window AC from freezing up, as well as give you some tips on how to keep your energy bills down. Keep reading to find out more.
Solutions To Try When Your Window Air Conditioners Freeze-Up
To keep this from happening, you should either turn off the unit when it’s not being used or install an insulation kit to help protect it from the cold. If you do have any problems with frozen windows, it’s best to call in a professional to help you out.
Insulation kits are fairly inexpensive and easy to install, so this is a great solution for anyone who wants to make sure their window AC stays functional all winter long. For more information about the kits, contact your HVAC contractor for advice. They’ll be able to help you find a good insulation kit that will keep your room as cold as possible without having to worry about it freezing up.
Another solution is to shut off the AC entirely when it’s not being used. You can do this by removing the front grille and locating the switch, then moving it into the off position. This will stop it from recirculating warm air back into your room, which should help prevent freezing up while also saving energy costs.
Image Credit: http://storables.com
Even if your window AC does freeze over, you shouldn’t let that stop you from using it – just remove some of the ice before turning on the power again (never use hot water or open flames like hair dryers for this). You should be safe to run it normally again, but keep an eye on the ice levels to make sure they don’t get too high.
Other Solutions To Try
While there are manytypes of air conditioning systems, all with their own ways of working, the following solutions might also be worthwhile trying if the above tips do not work.
If you’re not comfortable installing an insulation kit or turning your AC completely off when it’s not in use, there are a few other things you can do to try and prevent freezing.
One is to keep your windows open while the AC is running; this will help to circulate the cold air and keep it from building up. You can also try using a space heater to keep the room warm while the AC is on, as this will help to prevent the unit from freezing over. While it may not be the best idea to use a space heater if you have small children or pets, it can help a great deal.
Most importantly, it’s a good idea to make sure that any air bubbles in the window seal are eliminated before turning on your window AC. These can build up from condensation and cause issues, so poke each one with a long needle until you don’t see them leaking out anymore. If they’re blown out completely, there will be no pressure buildup to cause ice problems – just make sure your windows are as tight as possible before using the unit again.
Window AC’s should not be left running while unattended for safety concerns and also since doing this could prevent the unit from working properly due to over freezing. Shutting the window AC unit off when not in use is a good way to prevent this. The insulation kit is also an easy and effective solution to try. If these solutions do not work, then freezing may be unavoidable in colder climates.
In this case, just monitor the ice levels and remove any ice before turning the unit back on. Following these instructions should keep your room cool all winter long without having to worry about your window AC freezing up.
The Importance Of Not Having Dirty Filters
Make sure that you’re cleaning the filter regularly. This will help improve airflow and stop the unit from working harder than it needs to, which can also lead to freezing.
When the filter becomes clogged with dust, debris, and pet dander, it is not able to do its job properly. This can cause your window AC unit to work much harder than it needs to by making it run longer for the room to become cool again after shutting it off (this is known as short-cycling).
If you notice that your filters are dirty or clogged up regularly then you will want to replace them more frequently if possible.
Why Window Air Conditioners Freeze Up – FAQ
Can an AC electronic board be responsible for freezing units?
When window air conditioners freeze up, many people wonder if they need to replace the entire unit. In some cases, the electronic board may be at fault and need to be replaced. However, several other factors can cause an air conditioner to freeze up as well.
How do I know if the electronic board is bad?
The best way to determine if the electronic board is bad is to have it tested by a professional. If you are experienced in electrical work, you may be able to test the board yourself. The most common symptom of a bad electronic board is that the AC will not turn on at all.
You can usually test the board by checking for power at the connector. There should be power at all of the connectors, each connector should have 12 volts. The voltage may not be exact depending on your model, so you may need to check the manual for the correct reading.
How do I test an electronic board?
You can test an electronic board by removing it from the unit and testing it with a multimeter for a continuity test. If you are not comfortable removing wiring or working with electricity, then you should take your AC to a licensed repair shop to have this done for you. If there is no power at any of the connections when attempting to start up the window air conditioner, then the board is likely bad.
What causes my AC to freeze up during use?
A window air conditioner freezes up for a variety of reasons. The most common reason is a temperature that the unit can’t deal with. However, there are several other possible causes. One common cause is a dirty filter. When the filter is clogged with dirt and dust, it can prevent air from flowing through the unit properly.
Another common cause is a blockage in the condenser coil. If the coil becomes clogged with debris or lint, it will prevent the unit from cooling properly and can cause it to freeze up. Finally, if the refrigerant levels become too low, it can also cause the AC to freeze up.
How do I fix my window air conditioner that has frozen?
There are several other possible causes, so it is important to determine the root of the problem before attempting to fix it. If the filter is dirty, you can clean or replace it. If the coil is clogged, you can clean it with a vacuum cleaner. If the refrigerant levels are low, you can add more refrigerants. However, if none of these solutions work, then you may need to replace the entire unit.
Final Thoughts On Why Window Air Conditioners Freeze-Up
Image Credit: http://blairsair.com
In conclusion, there are several reasons why a window air conditioner may freeze up. By knowing the most common causes, you can usually fix the issue yourself. If you are not comfortable working with electricity, then it may be wise to seek professional help if your AC freezes up.
Finally, if you want to know what the best air conditioners are, ones that function correctly in different types of weather, you can check out our best air conditioners buying guide
The post Why Window Air Conditioners Freeze-Up appeared first on Kitchen Infinity.
Did you miss our previous article…
Sewage ejector pumps are an essential and often overlooked part of a septic system. If your sewage ejector pump is not working properly it can lead to major issues that could cost thousands of dollars in repairs or replacement.
In this article, we will discuss what a sewage ejector pump is, when you should replace it, how to install a new one, and how to maintain and troubleshoot your current pump. We will also answer some of the most common questions about sewage ejector pumps. Keep reading to find out more.
What is a sewage ejector pump?
A sewage ejector pump is a centrifugal pump that is generally used in septic systems but can also be found in household waste disposals.
Image Credit: http://rooterman.com
It works by drawing water out of the septic tank and forcing it through the building drain system where it eventually leaves your home. Because of this, these pipes are usually located near or in the basement.
There are two main types of sewage ejector pumps – rotary vane pumps and diaphragm pumps. Rotary vane pumps are more common, but diaphragm pumps are quieter and can handle more solids.
When should you replace your sewage ejector pump?
The general rule of thumb is that you should replace your sewage ejector pump every 5-7 years. However, this may vary depending on the type of pump you have, how often it is used, and the condition of the septic system.
If you are not sure whether or not it is time for a replacement, there are a few telltale signs that can help you decide:
If the pump is making strange noises, vibrating, or leakingIf the pump smells bad or is creating an excessive amount of noiseIf the pump is not working properly or is constantly clogging
If you are experiencing any of these problems, it is time for a replacement. All of these issues can cause extensive damage to your septic system and can be very costly to repair.
How to install a new sewage ejector pump
Replacing a sewage ejector pump is not a difficult task, but you must take your time and follow the proper steps.
The first step is to shut off the power to the pump. You can do this by flipping the breaker switch or by unplugging the pump.
Next, remove the cover plate from the pump and disconnect any hoses or wires that are attached.
Then, use a screwdriver or wrench to loosen the bolts that hold the pump in place. Be careful not to damage them as they will need to be reused later.
After you have loosened the bolts, lift the pump out of its cradle and attach it to your new sewage ejector pump. Make sure that the wires are also facing the correct way before you tighten any nuts or bolts.
Once everything is secure, reattach all hoses and wires and replace your cover plate.
Finally, turn on your power supply and test out your new sewage ejector pump. If everything works properly, then you’re done. If not, don’t worry- there are plenty of troubleshooting tips for this later in the article.
You can also check out this article onhow to install sump pumps if you’d like to know more about similar installation processes.
Image Credit: http://forbes.com
How to maintain and troubleshoot a sewage ejector pump
While replacing an old sewage ejector pump can be relatively simple, maintaining it over its lifetime can be a bit more difficult.
There are a few things that you can do to help keep your pump running smoothly:
Clean the pump regularly and remove any debris or build-up that may have accumulated.Make sure that the seals and gaskets are in good condition and properly lubricated.Check the hoses for leaks or damage and replace them if necessary.If the pump starts to vibrate excessively, try adding additional insulation or baffles to quiet it down.
If you are having problems with your sewage ejector pump, there are a few troubleshooting tips that you can try:
If the pump won’t turn on at all make sure that you have turned off and unplugged the pump and then check your circuit breaker.If the breaker is fine, try turning it on for 5-10 seconds before turning it back off again. Plug in the pump and see if it works properly.If this doesn’t work, there may be an issue with one of your wires or hoses. Check them out to make sure that they are connected properly or replace them accordingly. If they seem to be working fine, then there may be a problem with your electrical connections. Try tightening any loose wires/connections before calling a professional for help. If water is leaking from the pump check to see if the bolts are tight on the base of the pump. If they are, then there may be a problem with one of your hoses or wires.If these don’t seem to be the issue, try applying Teflon tape or pipe dopes to any threaded connections on your hoses and pipes. This will help seal any leaks that may have developed over time. If you can hear bubbles in your tank but you’re not getting any water out, the first thing that you should do is make sure that both valves are completely closed. Once this has been done, check for cracks or holes in any hoses or pumps leading into/out of the area around the tank.If everything seems to be in order, you may need to add more water to your tank. You can do this by opening up the valve and letting the water run until it is at the desired level. If this still doesn’t work, then you may have a blockage in your line and will need to call a professional for help.
Hopefully, these tips will help you keep your sewage ejector pump running smoothly for years to come.
Sewage Ejector Pump – FAQ
What is a sewage ejector pump?
A sewage ejector pump is a pump used to remove wastewater from a building. The wastewater is typically removed from the lowest level of the building, such as a basement or crawlspace.
What are the benefits of using a sewage ejector pump?
The main benefit of using a sewage ejector pump is that it can help to prevent flooding. A sewage ejector pump can help to keep the wastewater in the building’splumbing system and out of the basement or crawlspace.
How do I know if I need a sewage ejector pump?
The best way to determine if you need a sewage ejector pump is to contact a professional plumber. They will be able to assess your building and determine if a sewage ejector pump is necessary.
How much does a sewage ejector pump cost?
The cost of a sewage ejector pump will vary depending on the size and type of pump you need. You can expect to pay anywhere from several hundred dollars to several thousand dollars for a quality sewage ejector pump.
How do I install a sewage ejector pump?
Installing a sewage ejector pump typically requires the help of a professional plumber. They will be able to help you install the pump and ensure that it is working properly.
Final thoughts on a sewage ejector pump
In conclusion, sewage ejector pumps are found in many different types of commercial and residential appliances. Though they may vary in size, the pump itself is relatively easy to maintain and repair when needed.
These devices tend to last a very long time so you will probably not have to worry about replacing one for quite some time. If problems do arise, sewage ejector pump replacement can be done by most people with little technical experience.
The post Sewage Ejector Pump appeared first on Kitchen Infinity.
Did you miss our previous article…
You have a couch that’s past its prime time, and you’re on a tight budget. There are plenty of ways to update your couch, but most of them require spending money or taking up too much time. When you turn to these DIY couch cover ideas, then you won’t have to buy new furniture for your house.
Whether you want a new couch and chair or you want to redo your bedroom, there’s always a slipcover for your headboard. These slipcovers are easy to do and will instantly transform your home. Plus, you can give your old couch and chair a new look by spending only a fraction of what it would cost to replace them.
Here are DIY couch cover ideas for making your custom slipcovers in no time at all.
DIY Sofa Slipcover
This sofa slipcover is perfect for those who want to update their furniture on a budget. You’ll need some basic supplies, including a sewing machine and fabric. You’ll also have individual covers for the frame and cushions. This way, you won’t have to worry about constantly adjusting your cover every time someone sits on it.
DIY Drop Cloth Slipcovers
Repurpose old drop cloths to make your slipcovers. Depending on the look you want to achieve, you can make them patchwork-style or one solid piece. If you plan on painting your walls, this style is great because you can remove it at any time without damaging the underlying fabric.
Image credit: https://i.pinimg.com/
You can find drop cloths at almost any departmental or home improvement store at a relatively low cost. The covers will extend the life of your couch by a number of years and give your home a look you’ve always wanted.
Easy Sectional Cover
Do you have a sectional sofa but no cover for it? This easy DIY project is perfect for you. All you need is a piece of fabric that’s at least two feet wider and four feet longer than your sectionals.
Image credit: https://m.media-amazon.com/
This is a great way of covering your sectionals and ensuring you get the slipcover that fits perfectly. You can get a brand new look and create any pattern and design you like. These DIY slipcovers are very important.
Patio Furniture Covers
If you have patio furniture, it’s important to keep it covered when not in use. Not only will this protect the furniture from the elements, but it will also help to keep it looking new for years to come.
Image credit: https://www.patioproductions.com/
A simple patio furniture cover can be made out of a fabric that’s at least six feet wide and ten feet long. These DIY outdoor cushion covers can help transform your outdoor space.
No Sew Bench Cushion
If you have an old bench that could use a little bit of TLC, why not try this no-sew bench cushion? This project is easy and only takes a few supplies. You’ll need some batting, fabric, scissors, and a needle and thread but no sewing machine. Bench seats always make any area feel cozy and relaxing. So, you can DIY your bench cushion and customize it to your liking.
Easy Sofa Slipcover
If your sofa looks a little worse for wear, don’t worry. With this easy DIY slipcover, you can easily give it a new lease on life. This project will take you just a few hours to complete and only requires a few supplies.
All you need is some fabric, scissors, and a sewing machine if you have sewing skills. This simple and quick fix is a great-looking temporary fix that will transform your couch from a drab to fab.
IKEA Couch Makeover
Don’t worry if you have an old IKEA couch that you’re not quite sure what to do with. With this easy DIY makeover, you can easily give it a new lease on life. This project will take you just a few hours to complete and only requires a few supplies.
All you need is some fabric, scissors, and a sewing machine. You’ll sew through the buttons and add extra stuffing to your couch cushions. This DIY slipcover is budget-friendly, and the results will look amazing.
Dyed Sofa Slipcover
This is a great way to renew your old furniture in your living room. All you’ll need for this project is fabric dye and rubber gloves. You can also use a stencil if you prefer the look of that instead. The results will not only look fantastic but will cost you next to nothing.
If you’re looking to give your living room a bold new look, you’re going to want to take a look at this project. Plus, dying your couch cover can help cover up any old stains and signs of wear.
DIY Outdoor Cushion Covers
If you’re like most people, you probably spend a lot of time on your deck or patio during the summer. One way to make these spaces even more comfortable is to add some new cushions. But, buying new cushions can be expensive. Instead, why not try making your own?
This project is easy and can be completed in a few hours. Plus, the results will be fantastic. You’ll need cushion covers, Paint or fabric dye, Paintbrush or sponge, Masking tape, and Scissors.
DIY Tufted Cushions
Tufted cushions are chic, but they’re also very expensive. Luckily, you can make them yourself without spending too much money or time. For this project, you’ll need cushion covers, Scissors, Measuring tape or ruler, a Pencil or pen, and Thread.
This easy-to-follow tutorial will allow you to transform a budget-friendly sofa into a stylish anchor piece for your living room. In just 20 minutes, you can transform this couch’s entire look.
DIY Slipcovers with Piping
Piping can add a nice touch to any home décor project, and these slipcovers are no exception. For this lovely design, you’ll need cushion covers (fabric or foam), Scissors, Pencil/Pen, Measuring tape or ruler, and a Piping foot if your sewing machine doesn’t come with one already.
Whether you make your piping or purchase it at the store, this DIY couch cover keeps costs low without compromising on looks.
DIY Armchair Slipcover
Why not include your favorite armchair for fun as you’re making over your living room or sitting area? Here, learn how to make a DIY slipcover for an armchair.
This project is a little more complicated than others, but it’s still doable for almost anyone with basic sewing skills. To make it even cheaper, use drop cloths because they’re cheap, but that doesn’t mean they’re uncomfortable.
Couch Pet Protector DIY
Simplicity is key when working with slipcovers, and this DIY couch cover follows that rule. Use an old blanket or even a foam cushion to create a removable accent for your sofa that looks great but provides the perfect place for pets to snuggle up too.
These pets can cause havoc on couches, especially if they have sharp nails. They love to climb all over sofas, causing some serious damage. Thankfully, this DIY tutorial can provide you with a durable couch cover that will run along the back and arm of your sofa to protect it from pets.
Easy DIY Ruffled Sofa Slipcover
This easy DIY sofa slipcover doesn’t require much sewing, and it’s the perfect way to refresh your room without spending a lot of time or money. Plus, this is a great option for those who don’t have the necessary sewing skills to pull off something more complicated.
This idea couldn’t be simpler: measure your couch and head to the fabric store to pick up some coordinating fabric. You’ll also need a few basic supplies, like a sewing machine, needle, thread, pins, and scissors. The ruffles give your sofa and chair a comfortable and welcoming look.
This makes it go along with your DIY farmhouse furniture. These are much easier to make than they look, and you can cover your entire living with ruffles in just a couple of days.
DIY Ottoman Slipcover
You can cover those ottomans and make them look new again. If you’re making slipcovers from your couch and chairs, why not make one for your ottomans, so your entire living room set looks new? This DIY slipcover is easy to make, and you don’t even have to sew it.
You can also opt for one with pom-poms that can be easily removed so you can wash the DIY slipcover. If you don’t like poms, you can add a pleated skirt to your ottoman slipcover instead.
DIY Sheet Sofa Slipcover
You don’t have to buy expensive slipcovers from department stores to get that new furniture look. Instead, try to repurpose old sheets and make your DIY slipcover.
Image credit: https://photos.demandstudios.com/
You can buy inexpensive sheets if you don’t have a set that you can use, and they’ll look like a real thing. You can use them to cover the entire sofa, even the cushions. You can also remove and wash them regularly.
DIY Reclining Couch Slipcovers
Are you looking to give your old couch a new look? You can always use a slipcover to cover it. You have to buy the slipcovers that fit your reclining couches, and they should perfectly match your sofas’ size and shape.
After that, make modifications to your regular couch slipcover to make it fit over the reclining sections and cover those sections so that they stay put when the couch is reclined.
Striped Slipcover for Kid’s Sofa
If you have kids, they might want to have a couch of their own. You can surely buy them one, but it’s also possible to upcycle an old sofa into something that both adults and kids can use. Just remove the back cushions and cut out pockets for toy storage.
Image credit: https://cdn.decoratorist.com/
Then you can remove the seat cushions and sew some thick fabric or batting onto the bottom to make it a bit more comfortable. Finally, add a striped slipcover for an extra touch of fun.
Slipcover for Sofas with Attached Cushions
If your couch has attached cushions, you can still add a slipcover by measuring the width of the couch and adding an inch or two for seam allowances. Cut out a piece of fabric that’s at least two inches longer than the width of the couch, and sew the edges together.
Whether your cushions are attached to the back or the arms, you can customize a slipcover pattern to fit perfectly. Make sure your measurements are accurate and leave enough room to tuck the slipcover around your cushions when you put it on.
DIY Settee Slipcover
Measure the width and depth of your settee. Draw these measurements on paper, adding about two inches at each end for seam allowances. Cut out the pattern you’ve drawn and use it to cut a piece of fabric that’s wider than the settee but not so wide that it will hang over onto the floor. The settee tutorial will instantly brighten up any room, and it’s so simple to make.
FAQs about DIY Couch Cover Ideas
re slipcovers worth it?
Yes, they’re worth it because they can change up the look of your house in minutes. Plus, they’re easy to wash and can protect your furniture from spills and dirt.
Do I need a pattern?
No, you don’t need a pattern. You can measure the width and depth of your couch and then cut out a piece of fabric that’s the right size.
Final Thought about DIY Couch Cover Ideas
As you can see, these couch cover ideas are super easy to make. Just pick the one that you like best and get started. These DIY couch cover ideas can instantly change the look of your home.
The post 20 DIY Couch Cover Ideas appeared first on Kitchen Infinity.
Did you miss our previous article…
It can be hard to choose the perfect ground cover for your garden. There are so many options, like grasses and perennials, but not all will work well in every situation. Heather plants are a great option for those who want an attractive flower that acts as a natural weed suppressant.
This is because heather plants have deep roots that help keep weeds from growing around their base. They also make a great butterfly garden and attract other plant pollinators to your garden. If you’re looking for a ground cover that can keep your garden lush and green all year round, consider heather plants.
Here’s how to grow and care for heather shrubs.
Understanding Heaths and Heathers
As calluna Vulgaris, Heather plants are evergreen perennials found in woodlands and open fields, most often in sandy climates with low drainage and acidic soils. On the other hand, heaths or Erica describe an unrelated group of flowering plants.
Image credit: https://s3.amazonaws.com/
Although heaths and heathers belong to the same family called, they’re botanically different and are divided into the Calluna genus and Erica genus. But for practical purposes, they are both referred to as heaths or heathers. Heaths bloom from May to September and come in pink, purple, red, white, and yellow.
Heather blooms from August to November and comes in dark pink, purple, and white shades. Both heaths and heathers have fine foliage that forms a dense carpet. The tiny leaves are evergreen with needle-like shapes that grow in four rows along twisted stems.
Heathers and Landscaping
While the blooms of heather plants are the main attraction for gardeners and pollinators alike, their foliage should be your main focus. For example, you can choose to grow a variety called Calluna Vulgaris Firefly because it changes foliage color from copper in the summer to deep red in the winter.
When other ornamental plants are either dormant or looking weary in the winter, your heathers will radiate different shades of bright and lively colors. This makes them ideal for pathways and open areas in your garden. It’s also recommended to pair them with dwarf conifers.
Heather Plant Varieties
You have plenty of choices when it comes to heather varieties to grow. Even though heaths and heathers are often mistaken for each other, heaths are usually smaller and less colorful than heathers. Here are the heather plant varieties:
Also known as winter is fluffy foliage that changes color from winter to summer. Some varieties bloom in the summer, while others have their flowers open up in the winter. By growing different blooming varieties, you can have bright colors all year round.
Image credit: https://upload.wikimedia.org/
A popular choice for colder climates, this heather plant variety can thrive in USDA zone 4 or 5. They are known to be low maintenance, but they are recommended to grow with acidic soil. They have green foliage, but they bloom in white, lavender, and purple.
They can tolerate partial shade, although they favor full sun. Their flowers bloom from mid-spring through fall. They’re also called bell heath, thanks to their bell shape.
This is the most popular of all heather types. These heather shrubs have different shapes, sizes, and colors. They’re the recommended type to grow in your garden, thanks to their high tolerance to cold. They can also thrive in rocky or poor soil, making them perfect rock garden plants. Most varieties bloom in the summer and early fall.
How to Grow Heather Plants
Plant heaths and heathers in open areas, up hillsides, or along pathways. They pair well with dwarf conifers which require similar acidic soil conditions. They tolerate poor, rocky soil and even salty spray, making them marvelous along coastal hillsides where little else will grow.
Avoid planting in dry sites, under trees, or in areas exposed to harsh winter winds because they’ll suffer dehydration as evergreens. Heathers don’t become drought tolerant immediately, so they may not be the best choice if your garden is very dry. Heaths grow about one foot tall by 11/2 feet wide while heathers about 2 feet tall by 2 to 3 feet wide.
Space them as far apart as their mature width and at least 2 feet away from other shrubs to foster good air circulation. Most heather plant cultivars have USDA hardiness zones between 4 and 6, making them ideal for cold to moderate climates. Some heather shrubs can also grow in hardiness zones between 3 and 10, allowing them to grow in diverse climates and weather conditions.
No matter the type of soil you have, make sure you till it before planting heathers. Consider a sunny spot and dig a hole in the soil twice as deep and wide as the plant’s root ball you got from the nursery.
Your foliage should be as close to the ground as possible and water the soil to help the plant rest and avoid soaking. This is because the roots of heathers are sensitive to waterlogged soil. Choose acidic mulch to cover the soil as heathers prefer slightly acidic soil.
Caring for Heather Plants
Heather plants do well in a variety of soils but prefer acidic soil. Till the soil before planting heathers to ensure good drainage. If your soil is not acidic, mix in some organic matter to make it so. They’re also tolerant to very poor, rocky soil, but acidity is important.
If you have neutral or alkaline soil, consider acidic soil amendments such as damp peat moss. Avoid using sedge peat or spent mushroom compost as these can be too alkaline. Yellow leaves are a sign that soil pH lacks enough acidity for the plants. So, consider testing the soil pH for growing this shrub.
If you have heavy clay soil, you can double-dig the ground and incorporate lots of peat moss or ericaceous compost mixed with one-third of sand or grit to improve drainage. You can also plant your heather shrub on a raised bed using an equal mix of compost, composted bark, or peat moss and sand. This will not only create acidic soil but will also create well-drained soil.
Consider Sun Exposure
Heather plants need full sun to partial shade. In hot climates, it provides afternoon shade. A heather garden should be planted in a position where it will be unshaded for all or most of the day. If possible, site your heather plants, so the main view is from the south as foliage heathers always color well on the southern side.
Plant your heathers where they’ll get at least six or more hours of sunlight each day for the foliage effect, with afternoon shade on hotter days. Too much shade makes the plants leggy and dulls the brilliance of those that have colorful foliage.
Watering Heather Plants
Water heathers regularly, keeping the soil moist but not wet. Heather plants do not like to have their roots sitting in water, so make sure that the soil drains well. Mulching heather plants will help retain moisture in the soil. Their drought tolerant is normally established within two to three years from planting.
After that, your heather shrubs will take care of themselves. So, make sure you water your heather shrub during this time to keep the soil evenly moist and not soggy.
Temperature and Humidity Requirements
The ideal temperature range for heather plants is between 35-55 degrees Fahrenheit. You can grow these lovely evergreen shrubs throughout the country as long as you take care of them properly, but some zones are better than others.
Heathers require very little fertilizer. You can apply for a slow-release, granular form of balanced 10-10-10 fertilizer in the spring and summer months at the rate recommended on the package.
However, unless you grow heather for its flowers, never fertilize during the winter months. Doing so will encourage tender new growth, which will be damaged or killed when the inevitable cold of winter arrives.
After the blooms fade and the snows blow in, Heathers can look a bit ragged and scraggly. To remedy this, cut back any remaining flower stalks to just above where they emerge from the shrub’s foliage. Pruning heather is a snap with most models of hand pruners.
The best time for heather pruning is in early spring, shortly before the plants go dormant for winter. In areas prone to harsh winters, it’s especially important to prune heathers at this time because any tender new growth that emerges in the spring will be killed off by the cold.
Common Problems for Heather
Heather isn’t susceptible to many problems, but the available ones are easily avoidable. These include:
The single most common problem that heather faces are powdery mildew. If you’re growing your shrub in an area with hot, dry summers, this could be the problem you’re facing when keeping your plant healthy.
To prevent powdery mildew from appearing on your heather, make sure you prune faithfully every spring to keep plants compact, thereby improving airflow. Also, avoid overhead overwintering.
Rot typically sets in during very wet winters or springs. The telltale sign of root rot is plants that suddenly wilt, despite being well watered. If you think your heather might have root rot, dig around the base of the plant and take a look at the roots. If they’re brown and mushy, then your plant has root rot.
To prevent rot, make sure your heather is in sunny, well-drained soil and water sparingly when it’s going through a dry spell or very cold periods. If you suspect root rot, re-pot your plant into a fresh potting mix before bringing the shrub indoors during winter.
FAQs on How to Grow and Care for Heather Shrubs
What are the practical uses of heather shrubs?
Heather is an excellent plant for the landscape or garden. It can be used as a ground cover, border plant, or specimen. It can be made into tea and herbal remedies. It has been thought to help with cough and stomach upset ailments.
Final Thought on How to Grow and Care for Heather Shrubs
As you can see, growing and caring for these plants is not too difficult. They require little care and maintenance, and their bright colors and fragrant blooms make them a pleasant addition to any garden or landscape.
The post How to Grow and Care for Heather Shrubs appeared first on Kitchen Infinity.
Did you miss our previous article…
One of the best things about mid century modern bedrooms is that there are many different options to choose from. Whether you want your room to be simple and elegant or bold and in-your-face, there’s something out there for everyone. The trick is finding it.
In this article, we will discuss some of the most popular mid century modern bedroom designs that people use when they want to make their bedrooms look stylish and luxurious without breaking the bank.
dd a Mid Century Modern Nightstand
One of the easiest ways to add a touch of mid century modern style to your bedroom is by adding a nightstand. Nightstands are a great way to add extra storage space to your bedroom, and they can also be used to add extra visual interest to the room.
If you’re looking for a simple, elegant nightstand that will help you create a midcentury design, then try this one-piece mid century modern furniture to give your bedroom a shot of style. Nightstands are easy to find, and many of them are inexpensive.
Splash of Boho with Midcentury Modern Bedding
If you’d like to add a touch of bohemian style but don’t have the budget for new bedding, you can always choose to change out your duvet cover. This will help transform your room’s look while also being an economical option that doesn’t require extra money on accessories or furniture.
Incorporate Mid Century Modern Lighting
One of the easiest and most effective ways to add a touch of mid century modern style to your bedroom is by incorporating some mid century modern lighting into the design. Pendant light, for example, is a perfect way to introduce this look and can be found in a variety of price points.
If you’re looking for a sophisticated bedroom, then mid century modern decor pendant lights in matching finishes and some classic molded plastic chairs would be ideal.
Use Natural Materials
Instead of using modern materials, opt for natural wood and natural finishes. This will reduce the coldness found in many mid century modern designs. When using natural materials, consider combining wooden furniture as this will combine lots of sunlight and some plants to round out the colors.
Image credit: https://blog.modsy.com/
Focus on Earth Tones and Colors
For a classic mid century modern style, you’ll want to focus on color palettes such as neutrals and earth tones. Try to play with different shades of brown, rust, mustard, yellow, and green with a touch of gray and white. If you’re using a dark wall color, make sure you have enough natural light coming in so your room doesn’t look too gloomy. You can also learn other ways to brighten a dark room and make it livelier.
Skip the Classic Color Scheme
If you’re looking for something a little more unique, then you can try playing with different color schemes. If you also love clean lines, geometric shapes, and the overall clean feel of the mid century modern style but you’re not thrilled about the muted tones, then keep the style and ditch the colors.
Look for Tapered Legs
The mid century modern style is typically associated with furniture pieces with tapered legs, which gives the table, the dresser, and a bed frame a distinct look. If you choose between two otherwise identical tables, one of them has tapered legs, and the other doesn’t go for the more interesting design. Their sleek, round frames make for a roomier and more spacious look.
Image credit: https://blog.modsy.com/
Consider Bold Accent Wall
Do you want to give a simple mid century modern bedroom a powerful shot of style? Well, create a boldly patterned accent wall. A busy wallpaper with a strong geometric pattern or a solid color in a deep hue can make a big impact. It will also draw the eye and create a focal point in the room.
Image credit: https://cdn.shopify.com/
Keep it Neutral
When decorating a mid century modern bedroom, you’ll want to stick to neutral colors as much as possible. That doesn’t mean you have to go for a beige or gray overall color palette, though. Use a soft white in the walls, with off-white trim and accessories. For dark brown furniture, consider painting it a lighter shade of tan instead.
Image credit: https://www.mydomaine.com/
Go With Eames Chair
When it comes to furniture, the key is simplicity and functionality. A great way to achieve this look is with an Eames chair. These iconic chairs come in a variety of colors and styles so that you can find the perfect one for your room. Plus, they’re comfortable and stylish, making them perfect for mid century modern design.
Look for Natural Wood Furniture
Mid century rooms are all about natural materials, so feel free to go a little more rustic with your furniture choices. Look for pieces made from natural wood, such as maple, walnut, or oak. Also, consider clean lines and muted tones to bring mid century modern into your bedroom. These woods will add a warm and cozy feeling to your room while keeping with the mid century modern aesthetic.
Change Things Up with a Platform Bed
Don’t hesitate to change your bed frame for a more glamorous platform bed. The straight lines of a platform bed work well with mid century decor. So, opt for a nice platform bed, and then stack it with books and throw pillows to give your room extra personality.
Image credit: https://cdn.shopify.com/
Create a Gallery Wall to Act as a Focal Point
A gallery wall is a great idea for a mid century modern bedroom because it can be a focal point for the room. Choose a few of your favorite pieces of art and hang them up on one wall. This will add some interest to the room and help pull the design together.
Use Geometric Patterns
Geometric patterns are a huge part of mid century modern bedrooms, so use them in your room. Bring in a nightstand, a dresser, organic shapes of lamps, and clean, straight lines of furniture in the room. Choose clean and modern patterns to work well with your decor.
Incorporate Colorful, Fun Mid Century Modern Bedroom Furniture
One great way to add some fun to your bedroom is incorporating colorful furniture. This can be done with a bed frame, dresser, or even just with accent pieces. Add a pop of color with a bright pillow or blanket, and you’ll have a stylish and fun mid century modern bedroom.
Bright Accents in the Mid Century Modern Bedroom
If you prefer to keep your bedroom decor simple, then the use of bright colors is a great way to liven your space. You can incorporate these with wall art, patterned textiles, or even just with small pieces of decor placed on top of furniture. Adding a few shots of accent color will help liven up neutral bedroom space.
Glamorous Mid Century Modern Style
If you are looking to add a touch of glamor to your mid century modern bedroom, there are a few things you can do. You can start by adding metallic finishes to your furniture or accessories. You can also add plush fabrics such as velvet, faux fur, or silk since they also make the best ideas for those looking for how to decorate the bedroom
This will give the room a more luxurious feel. As demonstrated beautifully in this bedroom by an interior designer, the use of bold abstract paintings, luxurious fur throw, mustard armchair, and elegant furniture adds to a sophisticated and glamorous bedroom.
Built-In Bookcases in the Mid Century Modern Bedroom
If you are looking to build-in storage into your mid century modern bedroom, the best option is to install built-in bookshelves. This gives the room a more polished feel, but at the same time, it is functional. Shelves do not clutter up space and can be decorated with ornamental bookends or vases of flowers.
White Mid Century Modern Bedroom
A room with a white tone is always modern and chic. This bedroom oozes elegance and luxury through white silk curtains and plush white carpeting. The bed follows the line of symmetry and leaves plenty of space for the window. The bedside lamps give a warm glow that sets the mood for romance.
Image credit: https://www.thespruce.com/
FAQs on Mid Century Modern Bedroom Ideas
What is a mid-century bedroom?
Mid-century modern refers to the decorating style that rose to popularity in the 1950s and 1960s.
What are modern bedrooms?
Today, a modern bedroom is typically one that is minimalist in design, with clean lines and little ornamentation.
What is the difference between mid-century and contemporary?
Mid-century refers to the period around the 1950s, while contemporary usually means designs from the past 10 to 15 years.
Final Thought on Mid Century Modern Bedroom Ideas
Well, there you have it. You don’t have to be overwhelmed by all these modern bedroom ideas. Start with one thing at a time and move on from there while keeping in mind the key elements of mid-century design, including functionality, simplicity, and modernity.
The post Midcentury Modern Bedroom Ideas appeared first on Kitchen Infinity.
Did you miss our previous article…
Butterflies are admired for their bright colors and graceful movements. In addition, butterfly gardening is more than just an aesthetic choice to bring color to your garden, but butterflies also act as pollinators. They can greatly benefit the health of your garden plants. A butterfly garden provides a colorful array of nectar-producing plants that attract butterflies and offer plants to feed the caterpillar of their life cycle.
Whether it’s an indoor or outdoor space that is available, there are many options when it comes to creating a beautiful environment for these delicate creatures. Keep reading.
What is a Butterfly Garden?
Also known as butterfly sanctuary or butterfly habitat, it is an area for butterflies to feed and thrive. The plants you grow in your butterfly habitat attract butterflies and moths, which help with pollination.
Image credit: https://images.immediate.co.uk/
A proper butterfly garden can accommodate a variety of butterfly species at each stage of their entire life cycle, such as egg, larva, pupa, and adult. Butterflies are most attractive from spring to late summer when plant growth is peaking.
Steps for Creating a Butterfly Garden
Choose the Right Location
Select free-draining soil, preferably with full sun. However, there are butterflies who live for several seasons in shaded areas; one example is the Mourning Cloak (Nymphalis antiopa), which will remain in hibernation during summer when there is no shade. So, make sure that your location gets the right amount of sunlight for flowers to grow and attract butterflies.
Select Flowers that Attract Butterflies
Certain flowers are naturally more attractive to butterflies than others. Nectar-rich plants will bring in many types of butterflies, while flower shape and color can also matter. Serious butterfly gardeners fill their garden with nectar plants and host plants.
Image credit: https://hgtvhome.sndimg.com/
Adult butterflies drink nectar, so a nectar source will entice them to come to your garden. Host plants provide a place for butterflies to lay eggs, and they serve as food sources for caterpillars once the larvae hatch. The plant you grow will also support butterfly chrysalises, and different plants attract different butterfly species.
For instance, monarch caterpillars are primarily attracted to milkweeds, and swallowtail butterflies are drawn to verbena and lantanas. Other examples of butterfly-friendly flowering plants include aster flowers which are an important source of nectar for migrating butterflies in the fall. But before that, the butterfly larvae of the Pearl Crescent feed on its foliage.
The Showy Zebra Longwing butterfly, a Florida and Texas resident, feeds its babies exclusively on the foliage of the passionflower. And if you reside in the Eastern half of the United States, you may attract the iridescent Eastern tailed blue to your garden with a host planting of sweet peas. Many garden centers have labels on plants that are butterfly-friendly.
Use Organic, Homemade Bait to Attract Butterflies
If you want to attract butterflies to your garden, using bait is one way to do it. You can either buy or make your bait. Sugar and yeast-based bait can provide food and essential nutrients for butterflies. You can make a homemade bait with a mix of rotting fruit like bananas, peaches, plums, and apples.
You can also use white sugar, molasses, and beer. Place the butterfly bait in an area that is easily accessible to butterflies, such as on flat rocks, tree trumps, and a shallow dish.
Place or Create Shelter for Butterflies
Butterflies are cold-blooded insects that need shelter to protect them from the elements. Make sure you build them small shelters around your garden. You can also provide shelter in potted plants placed against walls overgrown with vines.
Image credit: https://images.saymedia-content.com/
You can also create a loose mulch in your garden to protect butterflies against the cold when they are molting or transitioning from immature to adult. Keep it away from plants you want to keep healthy, but do not remove the natural mulch that will break down over time under sunny conditions.
Include a butterfly shelter into your garden by planting one to two feet tall native plants along the edge of wooded areas. This provides butterflies with cover from predators while giving them access to fruit, nectar, and water sources in the wild.
Trees and shrubs can provide shade and resting places for butterflies, but you can protect butterflies against predators and harsh weather conditions by building a shelter. Butterfly houses can act as places for butterflies to rest and hibernate and as a place for caterpillars to cocoon.
Keep it Sunny
Butterflies are cold-blooded insects that will be less active on colder mornings. Make sure you locate your butterfly garden in part of your yard that receives at least six hours of direct sunlight each day.
Create a Garden that Emulates their Natural Habitat
Butterflies like to live in areas with plenty of nectar-producing plants, host plants for caterpillars and water sources. Try to include a variety of plants in your butterfly garden, including milkweed, Joe Pye weed, black-eyed Susan, butterfly bush, western coneflower, and coreopsis.
When you plant your seeds or transplant butterfly-friendly perennials, make sure they are native to the area in which you live. Use a mixture of perennials and annuals to prolong blooming time. Flowering containers allow you to exchange plantings during low blooming lulls in the garden like late spring and late summer.
Use a combination of window boxes, patio containers, and hanging baskets to create staggered blooming heights in your butterfly garden. Plant nectar flowers in groups instead of singly. Butterflies prefer moving from bloom to bloom of the same type of flower rather than fly from one nectar plant in search of another that may be growing some distance away.
dd a Water Source
Hummingbirds are attracted to many of the same flowers as butterflies are, so you can have both flying around your garden if you add a birdbath. Even though butterflies do not drink from standing water, they love rain puddles and damp patches that form on leaves after it rains.
Butterflies will seek shallow puddles in your garden not only as a source of drinking water but also as a way of obtaining vital minerals. So, a puddling station is essential to keep your butterflies hydrated and receive vitamins and other nutrients from muddy water like sodium. A shallow dish filled with soil, sand, or pebbles can create watery mud and be a valuable drinking station on hot days.
Offer Alternative Butterfly Foods
Your garden should contain a range of butterfly-friendly plants. Some must be in full sun and require regular watering if you want butterflies that lay eggs in your garden. If the weather is cool or there is not enough sunlight, it will open nectar sources.
Provide these nectar sources by growing flowers such as daisies, zinnias, sunflowers, crocuses, and marigolds. Placing overripe fruit like peaches, bananas, and peas in a shallow dish will help continue the feeding cycle for adult butterflies when nectar plants move past bloom.
Fermented beer or molasses can also be used as a condiment to the fruit main dish, providing irresistible species such as the Question Mark and Red Spotted Purple. Replace the fruit frequently to discourage wasps and ants from taking over the buffet. You can also use a window screen to cover the fruit to block wasps and bees. With their long proboscis, butterflies will still be able to feed.
Stay Clear of Toxic Pesticides
Avoid pesticides that can harm butterflies. Many pesticides kill butterflies and other pollinators, so it is important to read the label before using insecticides. Look for products that are specifically labeled as butterfly-safe. As a butterfly gardener, tread carefully with insecticides to avoid harming butterflies and other beneficial pollinators such as bees and parasitic wasps.
Even organic pest control options like insecticidal soap and neem oil can kill butterflies or disrupt their feeding and mating habits. But this doesn’t mean that you should hand over your flowers to the aphids. Instead, non-pesticide insect controls like floating row covers, jets of water to blast away small insects, and handpicking large insects like beetles.
Also, your best bet for pest control in your butterfly garden should be companion planting. In addition to planting flowers that attract butterflies, consider planting flowers that repel pests.
Keep a Diary
One of the best ways to learn more about making your butterfly garden thrive is to keep a diary. Record what you plant, when you plant it, what type of butterflies visit, and any other observations. This will help you better understand what works in your garden and what doesn’t.
How to Select Butterfly-Friendly Plants
Nectar Plants vs. Caterpillar Host Plants
When choosing plants for your butterfly garden, include plants that will support butterflies throughout their life cycle. Flowering nectar plants offer food and energy for adults, while the leaves of larval plants such as parsley and milkweed nourish growing caterpillars.
Plants that provide both nectar sources for butterflies and caterpillar food sources for butterfly larvae can be invaluable. This will ensure that butterflies flutter around your yard as adults and come back as caterpillars to eat and grow into the next generation of butterflies.
Plant for Continuous Bloom
One way to ensure a continuous bloom in your butterfly garden is to plant a variety of plants that flower at different times of the year. This will provide food for adult butterflies throughout the growing season, especially in mid to late summer when butterflies are most active.
Plant for Diversity
In addition to planting for continuous bloom, it is important to plant for diversity. This will provide a variety of different nectar sources for butterflies and caterpillar food sources. A well-planned butterfly garden will have a mix of both flowering plants and shrubs.
To provide the best forage for butterflies, select native plants where you live. Butterflies have highly specialized relationships with certain plant species, which can be disrupted if a non-native species is introduced into the garden.
Native plants also tend to do well in your region and require less maintenance while providing just as much beauty as exotic plants.
Plant for Color
You can attract butterflies into your garden by ensuring that there are flowers in every color of the rainbow. Butterflies are very attracted to bright colors, especially reds and yellows.
Planting a wide variety of flowers will ensure access to these colors. Fragrant flowers also attract some species of butterflies, so consider adding attractive scents to your garden. You can get plants that bloom throughout, plant spring-blooming flowers, or anything but just ensures your garden has flowers throughout the year.
FAQs on How to Make a Beautiful Butterfly Garden
Do butterflies need water?
Monarchs and other butterflies need moisture but cannot land on water to drink, so a typical garden pond, fountain, or birdbath won’t help them.
What does a butterfly habitat look like?
Butterflies live worldwide except in the attic. Any place with nectar-producing flowers will host butterflies. Some species live in the desert and feed on succulent plants that grow in harsh conditions.
Final Thought on How to Make a Butterfly Garden
Designing and planting a butterfly garden is a fun project that the entire family can enjoy. With a little bit of planning and some creative thinking, you can create a garden that will bring beauty and enjoyment to your home for years to come.
The post How to Make a Butterfly Garden appeared first on Kitchen Infinity.
Did you miss our previous article…